Montgomery County · Trim, Doors & Stairs

Interior & Exterior Door Installations in Conroe, TX

New doors change how a Conroe home sounds, looks and seals. Ace Kustoms installs solid-core interior doors and weathertight entry doors throughout Montgomery County.

Free Estimate in Conroe Call (281) 660-3903

Interior & Exterior Door Installations for Conroe homes

Conroe is the Montgomery County seat, on I-45 about 40 miles north of downtown Houston. It has a historic downtown around the courthouse square, fast suburban growth along the freeway and SH 105, and Lake Conroe to the northwest. The Sam Houston National Forest lies to the north, giving the area a wooded, outdoorsy character.

Conroe's housing ranges from older homes near downtown to large new subdivisions and lake properties. Older homes often need full kitchen remodels and trim updates, new homes want builder-grade upgrades, and lake and acreage homes ask for outdoor kitchens and garage storage. Pine-shaded lots and humid air make plywood boxes a practical choice.

Families in Conroe benefit from solid-core doors on bedrooms, playrooms and home offices, which reduce noise between rooms. Pocket doors and barn doors can solve tight spaces in kids' bathrooms and laundry rooms. We also install secure entry and garage-to-house doors with quality locks and proper fire ratings where required, so the home is both quiet and safe. Quiet matters.

Every project starts with an in-home measurement in Conroe. We build in our Houston shop and the same crew handles installation, so the person you talk to at the estimate is accountable for the result. Learn more about our full interior & exterior door installations service.

What you get with Ace Kustoms

Solid-core upgrades

Replacing hollow-core interior doors with solid-core doors reduces sound transfer between bedrooms, bathrooms and offices, and gives the door a heavier, more substantial feel. Solid-core doors are also less likely to dent or crack.

Flashed exterior installations

Exterior doors get a sloped sill pan or flashing system, sealed side and head flashing tied into the weather barrier, and a properly bedded threshold. Water intrusion at the sill is the most common cause of rotted door frames.

Weathertight sealing

Quality weatherstripping, adjustable thresholds and door sweeps keep out conditioned-air leaks, insects and wind-driven rain. That matters in Houston, where the AC runs most of the year and summer storms push water sideways.

Matched trim and casing

New doors usually need new casing. We match existing trim profiles or upgrade to a new casing style throughout the house, with tight miters and clean caulk joints for a finished look.

Popular options in Conroe

French and double doors

French doors with glass panels between living areas, offices and dining rooms let light through while separating spaces. Double doors need careful alignment at the meeting stiles and proper astragals or ball catches.

Barn and sliding doors

Sliding barn doors on exposed tracks suit offices, closets and pantries where a swing door would not fit. We mount tracks into solid blocking and can build custom wood door slabs in our shop.

Entry doors

Fiberglass, steel and wood entry doors, single or with sidelites and transoms. Fiberglass resists Houston humidity and dents well. Wood entry doors need a protected overhang and regular finish maintenance.

Patio and back doors

Hinged patio doors and back doors to yards and garages, including fire-rated doors between the garage and house where required. We pay close attention to sill flashing on these doors, which face the most weather.

Ornate white decorative molding on a wall

Living room with paneled wainscoting and twin windows

How a Conroe project runs

Measure and inspection. We measure rough openings and existing jambs, check framing for plumb and rot, look at sill and threshold conditions and note any trim that will need replacement.
Selection. You choose door style, material, glass, swing direction and hardware. We confirm sizes, jamb depths and handing, and order or build doors to fit your openings.
Removal and preparation. We remove existing doors and trim carefully, repair rotted framing or subfloor, and install sill pans and flashing for exterior doors before setting the new unit.
Installation. Doors are set plumb and square, shimmed at hinges and latch, fastened through to framing and insulated around the jamb. Hardware and weatherstripping are installed and adjusted.
Trim and walkthrough. We install casing, caulk and fill, and coordinate painting or staining. We test each door for swing, latching and sealing and walk through the finished work with you.

Local conditions we plan for

Houston humidity makes wood doors and jambs swell, which is why doors that close easily in winter can stick in August. We set reveals with seasonal movement in mind and seal all edges of wood doors, including tops and bottoms. Exterior doors face wind-driven rain during storms, so proper sill pans and flashing are essential, and we often find rotted bottoms of jambs on older doors. In coastal areas toward Galveston County and Brazoria County, windstorm-rated doors and installation methods may be required, and we confirm requirements before ordering. Fiberglass entry doors handle heat and humidity well, while dark-colored steel doors in direct western sun can get very hot.

Shade from the pines keeps some homes cooler but can trap moisture, and humidity remains a factor year-round. We build boxes from plywood and choose stable door constructions. For lake homes, we plan finishes for damp air and for rooms where doors are opened often. Garage and outdoor cabinets get materials and finishes meant for heat swings, and for homes near the San Jacinto River or Spring Creek we can discuss raised bases.

As a general planning range, installing a solid-core prehung interior door in Greater Houston often runs about $450 to $1,100 per door including casing, while exterior entry doors commonly run $1,800 to $6,000 or more depending on material, glass and sidelites. Pricing varies by door, materials and site conditions, so please get a written estimate.

Interior & Exterior Door Installations in Conroe: FAQs

Are solid-core doors worth it?

For bedrooms, bathrooms and home offices, yes. Solid-core doors reduce sound transfer noticeably, feel more substantial and resist dents better than hollow-core doors. Many homeowners upgrade the doors throughout the house at once for a consistent feel. Hardware can be upgraded at the same time.

Why does my exterior door frame rot at the bottom?

Usually because water gets behind the threshold or into the bottom of the jamb, often from missing sill flashing, failed caulk or splash from a patio. We repair the rot, install a sill pan and flashing and use rot-resistant jamb materials to prevent recurrence.

Do I need a windstorm-rated door?

Homes in designated coastal areas, including parts of Galveston County and Brazoria County, may need windstorm-rated doors and specific installation methods. Requirements depend on location and permit conditions. We confirm what applies to your home before ordering a door. Permits may apply as well.

Does Ace Kustoms work in Conroe?

Yes. Conroe is part of our regular service area in Montgomery County, along with nearby The Woodlands–Conroe, Willis, Panorama Village, Cut and Shoot. We schedule in-home measurements throughout the week and the estimate is free.

How do I get an estimate in Conroe?

Call (281) 660-3903, text us, or send the form on this page with a few photos and rough measurements. We will set up an in-home visit, measure the space and follow up with a written, itemized estimate.

More services in Conroe

Explore

Planning guides

Trim & Millwork · 8 min read