Montgomery County · Kitchens & Baths

Custom Bathroom Vanities in Conroe, TX

Floating, furniture-style or double-sink, your Conroe vanity can be built around how you use the room. We design, build and install custom vanities across Montgomery County.

Free Estimate in Conroe Call (281) 660-3903

Custom Bathroom Vanities for Conroe homes

Conroe is the Montgomery County seat, on I-45 about 40 miles north of downtown Houston. It has a historic downtown around the courthouse square, fast suburban growth along the freeway and SH 105, and Lake Conroe to the northwest. The Sam Houston National Forest lies to the north, giving the area a wooded, outdoorsy character.

Conroe's housing ranges from older homes near downtown to large new subdivisions and lake properties. Older homes often need full kitchen remodels and trim updates, new homes want builder-grade upgrades, and lake and acreage homes ask for outdoor kitchens and garage storage. Pine-shaded lots and humid air make plywood boxes a practical choice.

Older Conroe homes often have small hall baths with a 30-inch-tall vanity, a drain in the floor and almost no storage. A custom unit raised to comfort height with drawers built around the trap can double the usable space. We match the period of the home with inset doors or furniture legs when that suits the house. We also correct out-of-level floors so the top sits flat.

Every project starts with an in-home measurement in Conroe. We build in our Houston shop and the same crew handles installation, so the person you talk to at the estimate is accountable for the result. Learn more about our full custom bathroom vanities service.

What you get with Ace Kustoms

Built and installed locally

Every vanity is built in our Houston shop and installed by our in-house crew, who level it on your slab, anchor it to studs, and coordinate the top and sink placement with your plumber or ours.

Moisture-resistant construction

Plywood boxes resist swelling far better than the particleboard used in most big-box vanities. We seal interiors and the underside, and finish sink-base floors with a durable coat so a small leak does not turn the bottom into mush.

Exact width and height

We size the vanity to your wall, leaving code-friendly clearance to the toilet centerline and room for door swing. Counter height is set to suit you, typically 34 to 36 inches for adults, with a toe-kick tall enough to clear baseboard.

Plumbing-aware interiors

Drawers are notched or U-shaped around the trap so you keep usable storage under the sink. We locate drain and supply stub-outs before building, so we do not end up with a drawer that cannot close over a P-trap.

Popular options in Conroe

Wood species and finish

White oak and walnut look warm against tile and resist moisture well under a sealed finish. Painted maple in white, gray or navy is popular. We show finished samples next to your tile choice so the colors work together.

Hardware and drawer layout

Choices include full-extension soft-close slides, hair-tool drawers with a vented outlet, divided drawers for makeup, and tip-out trays at the sink front. Pulls can be brass, black, nickel or edge-grip for a seamless look.

Floating vanities

Wall-hung vanities mount to blocking inside the wall and leave the floor open below, which makes small baths feel larger and simplifies mopping. Typical depth is 18 to 21 inches, and we often add under-cabinet LED lighting for a night light.

Furniture-style vanities

Legs, a recessed base and furniture-style moldings give a vanity the look of a freestanding chest. These suit traditional homes and powder rooms, and we build them in walnut, cherry or painted maple with turned or tapered legs.

Gray shaker bathroom vanity with a white top

Floating vanity with double vessel sinks

How a Conroe project runs

Measure and plumbing check. We measure the wall, check plumbing locations, look at outlets and mirror placement, and note floor and wall conditions. If the drain needs to move for a wider vanity, we flag that before design starts.
Design and material samples. You choose size, layout, wood species, finish, sink type and hardware with real samples. We confirm the counter material and sink model so the cabinet is sized for its cutout and weight.
Shop build and finishing. We build the box, doors and drawers in our shop and spray the finish in a controlled booth, sealing all surfaces including the back and underside for moisture protection.
Installation. Our crew removes the old vanity if needed, adds wall blocking for floating units, levels and anchors the cabinet, and prepares it for the top. We coordinate countertop install and plumbing reconnection.
Walkthrough and adjustment. After the top and faucet go in, we adjust doors and drawers, check for leaks under the sink, and walk you through finish care and any final punch list items.

Local conditions we plan for

Bathrooms in Houston see moisture from both directions: steam from inside and humid air from outside, especially in homes where the AC cycles less during mild months. That is why we build vanities from plywood, seal every surface and leave a small gap at the floor so mopping water does not wick into the base. Many older slab homes have drains coming up through the floor rather than the wall, which limits drawer layouts, so we plan around them. In coastal areas, we choose hinges and slides with better corrosion resistance. We also recommend an exhaust fan that vents outdoors, since no finish will survive a bathroom that stays damp for hours.

Shade from the pines keeps some homes cooler but can trap moisture, and humidity remains a factor year-round. We build boxes from plywood and choose stable door constructions. For lake homes, we plan finishes for damp air and for rooms where doors are opened often. Garage and outdoor cabinets get materials and finishes meant for heat swings, and for homes near the San Jacinto River or Spring Creek we can discuss raised bases.

As a general planning range, a custom single-sink vanity in Greater Houston often starts around $1,800 to $3,500 installed for the cabinet, while a 72-inch double vanity with drawers may run roughly $4,000 to $8,500 before countertop and plumbing. Final cost depends on size, materials and site conditions, so please get a written estimate after an in-home measure.

Custom Bathroom Vanities in Conroe: FAQs

How long does a custom vanity take?

Most vanities take about three to six weeks from approved design to installation, depending on finish and our shop schedule. Installation of the cabinet itself is usually a day, followed by countertop and plumbing reconnection. Call (281) 660-3903 to schedule your free estimate.

What is the standard height for a bathroom vanity?

Older vanities were often 30 to 32 inches tall. Most homeowners now prefer comfort height, around 34 to 36 inches to the counter surface, which matches kitchen height and reduces bending. For vessel sinks we lower the cabinet so the rim lands at a comfortable level. We set height based on your preference and sink choice.

Can a floating vanity hold a stone top?

Yes, when it is mounted correctly. We add solid wood blocking between studs behind the vanity and fasten the cabinet through its back rail into that blocking. A 60-inch quartz top can weigh well over 100 pounds, so the blocking matters more than the cabinet itself. Retrofit may require opening drywall.

Does Ace Kustoms work in Conroe?

Yes. Conroe is part of our regular service area in Montgomery County, along with nearby The Woodlands–Conroe, Willis, Panorama Village, Cut and Shoot. We schedule in-home measurements throughout the week and the estimate is free.

How do I get an estimate in Conroe?

Call (281) 660-3903, text us, or send the form on this page with a few photos and rough measurements. We will set up an in-home visit, measure the space and follow up with a written, itemized estimate.

More services in Conroe

Explore

Planning guides

Bathrooms & Vanities · 7 min read