Custom Fireplace Surrounds & Mantels in Seabrook, TX

How a Seabrook project runs

1. Inspect the fireplace. We identify the fireplace type, whether masonry, factory-built or gas insert, and note the model if available. We measure the opening, hearth, wall and existing face material.
2. Confirm clearances. We check required distances to combustibles from code guidance or the manufacturer's manual, and note any non-combustible facing needed around the opening before designing the mantel.
3. Design and select finishes. You review a drawing with mantel height, profiles and any flanking cabinets, then choose wood, paint or stain and trim details from real samples. Nothing is built until you approve.
4. Build in our shop. We build the mantel, surround and built-ins in our Houston shop, finishing them before delivery. Mantel shelves are assembled as solid or laminated hardwood pieces.
5. Install and finish trim. We install the surround, anchor the mantel into framing or masonry, scribe to the wall and hearth, and connect it with surrounding trim. A final walkthrough checks every joint.

Local conditions we plan for

Many Houston homes from the 1970s through the 2000s have factory-built fireplaces with metal fireboxes, and their clearances come from the manufacturer's manual, which is sometimes missing. We look for the data plate inside the firebox to identify the model. Older 1950s and 1960s masonry fireplaces may have settled with the slab, leaving uneven hearths and faces that require careful scribing. Fireplaces on exterior walls see temperature and humidity swings, so we finish mantels on all sides. Many Houston fireplaces are used only a few times a year, but clearances still apply every time the fireplace is lit.

Houston humidity is the main thing we design around. Solid wood moves with the seasons, so we use furniture-grade plywood for cabinet boxes and shelves, and frame-and-panel doors that let panels float. Sink bases get extra finish protection, and in neighborhoods along bayous or in flood-prone zones we can raise toe kicks or use moisture-resistant materials on the lowest components. Keeping the house conditioned during installation helps everything settle in properly.

As a general planning range, a custom mantel shelf or simple surround in Greater Houston often lands around $1,500 to $4,500, while a full paneled overmantel with flanking built-ins can run $8,000 to $20,000 or more. Masonry, tile or electrical work adds to that. These are planning figures that vary by size and materials, so ask us for a written estimate.