Custom Home Bar Cabinetry in Katy, TX

How a Katy project runs

1. Plan the bar's role. We talk about how you host, what you serve and how many people gather, then measure the space and locate plumbing, electrical and HVAC that affect where appliances can go.
2. Spec the appliances. We work from the exact appliance models you choose, including cutout sizes, ventilation and drain needs. That keeps openings precise and avoids installation surprises later.
3. Design and select finishes. You review a drawing with cabinet layout, wine and glass storage, lighting and countertop. Then you choose wood, paint, glass, hardware and countertop from real samples.
4. Build in our shop. We build the cabinets, wine racks and panels in our Houston shop, finishing all surfaces with spill-resistant coatings before delivery to your home. Wine racks are test-fit with real bottles.
5. Install and coordinate. The crew installs the cabinets, then coordinates countertop templating, plumbing and electrical. We fit appliances and panels, adjust doors and test lighting before the final walkthrough.

Local conditions we plan for

On Houston's slab foundations, adding a wet bar sink away from existing plumbing can mean cutting concrete for a new drain, which adds cost. Placing a bar near a kitchen, laundry or bathroom wall keeps it simpler. Ice makers and beverage fridges work harder in warm rooms, so we keep them away from west-facing walls and ensure front ventilation stays clear. Wine should be kept in a wine cooler rather than open racks if the room warms when the AC is set back. Humidity and condensation from cold glasses make sealed finishes and stone or quartz countertops a practical choice.

Fort Bend sits on flat, low ground along the Brazos River and its creeks, and humidity stays high most of the year. We use plywood boxes and stable door construction to handle seasonal swelling. For homes in areas that have seen high water, we can discuss raised toe kicks, moisture-resistant bases in laundry rooms and garages, and finishes that tolerate wipe-downs. Good ventilation in bathrooms protects vanity finishes over time.

As a general planning range, a dry bar in Greater Houston often runs around $5,000 to $12,000 including countertop, and a wet bar with a sink, ice maker and wine storage commonly ranges from $15,000 to $35,000 or more, not counting appliances. Plumbing on a slab can add more. These figures are for planning only, so get a written estimate after we visit.