Custom cabinetry, trim & remodeling across Greater Houston Call (281) 660-3903 Text (832) 280-1608
Custom Laundry Room Cabinets in Spring, TX

Harris County · Storage & Organization

Custom Laundry Room Cabinets in Spring, TX

If your Spring laundry room is down to one wire shelf and a pile of bottles, custom cabinets can help. We build them across Harris County.

Custom Laundry Room Cabinets for Spring homes

Spring is a large unincorporated area in north Harris County along I-45, just south of The Woodlands and Spring Creek. Its historic center, Old Town Spring, has shops in older buildings, while the area around it is made up of many subdivisions. The Hardy Toll Road and the Grand Parkway cross the area.

Spring's housing is mostly suburban homes built from the 1970s onward, with newer subdivisions closer to the Grand Parkway. Many older homes have oak cabinets, soffits and builder trim, and some neighborhoods along creeks have flooded. Kitchen remodels, closet upgrades and raised-base cabinets in laundry rooms are frequent projects, along with game room built-ins.

Families in Spring often run several loads of laundry a day, so the room needs to work quickly. Sorting hampers, a folding counter and hanging rods keep laundry moving instead of piling up. Locked or high storage for detergents and pods keeps young children safe, and labeled cubbies let older kids pick up their own clean clothes. Laundry stops piling up.

Every project starts with an in-home measurement in Spring. We build in our Houston shop and the same crew handles installation, so the person you talk to at the estimate is accountable for the result. Learn more about our full custom laundry room cabinets service.

What you get with Ace Kustoms

Supplies off the floor

Upper cabinets and pull-outs hold detergent, stain removers, dryer sheets and cleaning supplies. Child locks or high storage keep pods and chemicals away from small children and pets. Pull-outs put everything in view.

Moisture-resistant construction

Sealed plywood boxes, finished interiors and a waterproof liner or sealed floor in the sink base protect against drips and leaks. Particleboard cabinets swell quickly when exposed to water in a laundry room.

Hanging and drying built in

A rod under the upper cabinets for hanging shirts straight from the dryer, plus a fold-down or pull-out drying rack for delicates. Clothes stay wrinkle-free and air-dried items have a dedicated place.

Sorting without the clutter

Pull-out or tilt-out hampers for darks, lights and towels keep dirty laundry sorted and hidden. Bins lift out for carrying to the machines, so piles stop gathering on the floor.

Popular options in Spring

Open shelving and cubbies

Open shelves for baskets and folded towels, or cubbies for each family member's clean laundry. Painted or stained hardwood shelves add warmth to a mostly white utility room. Baskets can be labeled.

Finishes and countertops

Painted finishes in white, gray, green or blue with laminate, quartz or solid surface counters. Butcher block looks warm but needs sealing and care near the sink and machines. We bring samples of each.

Side-by-side machines with counter

Front-load washer and dryer under a continuous countertop with upper cabinets above and a narrow pull-out between machines for detergent. A common layout that makes the most of a single wall.

Stacked machines with tall cabinet

A stacked washer and dryer beside a tall cabinet for brooms, the vacuum and an ironing board. Frees up wall space for a sink or folding counter in narrow rooms.

White shaker kitchen with glass-front upper cabinets
Installer mounting a drawer slide with a drill

How a Spring project runs

  1. Measure machines and utilities. We measure the room and your washer and dryer, then locate water supply, drain, dryer vent, gas line if any and outlets. These set where cabinets can and cannot go.
  2. Plan the work flow. You review a layout that follows the laundry process: sort, wash, dry, fold, hang and put away. We place hampers, counters and rods in the order you use them.
  3. Select finishes and counters. You choose cabinet color, hardware and countertop from real samples. We recommend moisture-resistant options for areas near the sink and machines. We also look at how each sample handles water spots and detergent drips.
  4. Build and seal in our shop. We build plywood cabinets in our Houston shop, sealing every surface and lining the sink base, then finish them before delivery so they are ready for daily use.
  5. Install and test clearances. The crew installs cabinets and counter supports, checks clearance around machines, vents and valves, and confirms the washer and dryer can be pulled out for service.

Local conditions we plan for

Houston laundry rooms combine high outdoor humidity with washer moisture and dryer heat, which is hard on cabinets. Sealed plywood construction and moisture-resistant finishes are important. Dryer vents should run the shortest path to the outside, and we never block or crush them behind cabinets. On slab foundations, moving machines or adding a sink means trenching concrete, so we work with existing plumbing whenever possible. A washer pan with a drain, or at least a leak sensor, is a good idea for upstairs laundry rooms common in newer two-story homes.

Houston humidity is the main thing we design around. Solid wood moves with the seasons, so we use furniture-grade plywood for cabinet boxes and shelves, and frame-and-panel doors that let panels float. Sink bases get extra finish protection, and in neighborhoods along bayous or in flood-prone zones we can raise toe kicks or use moisture-resistant materials on the lowest components. Keeping the house conditioned during installation helps everything settle in properly.

For general planning, laundry room cabinets with uppers and a folding counter in Greater Houston often run around $4,000 to $9,000, while larger rooms with a sink, tall storage and specialty pull-outs can range from $10,000 to $20,000 or more. These figures vary with size, materials and site conditions, so ask for a written estimate after we measure.

Custom Laundry Room Cabinets in Spring: FAQs

Will wood cabinets hold up in a laundry room?
Plywood cabinets with sealed edges and finishes hold up well. The problem is usually particleboard, which swells quickly when wet. We seal every surface, line sink bases and keep cabinets off wet floors where possible. Hardware and finishes are also chosen to tolerate humidity and occasional splashes.
How high should cabinets be above the machines?
Upper cabinets typically sit 18 to 24 inches above the top of front-load machines or a counter. For top-load washers, we leave enough clearance for the lid to open fully. We check your machine's specifications before setting heights. Taller households sometimes prefer the lower end of that range.
Can you add a sink to my laundry room?
Often yes. The washer supply and drain can sometimes serve a nearby sink. On slab foundations, a sink far from existing plumbing may require cutting concrete. We coordinate with your plumber to plan the most practical location. A sink near the washer is usually simplest.
Does Ace Kustoms work in Spring?
Yes. Spring is part of our regular service area in Harris County, along with nearby Spring–Klein, The Woodlands, Humble, Tomball. We schedule in-home measurements throughout the week and the estimate is free.
How do I get an estimate in Spring?
Call (281) 660-3903, text us, or send the form on this page with a few photos and rough measurements. We will set up an in-home visit, measure the space and follow up with a written, itemized estimate.

Planning guides

Free, no-pressure estimate

Get your free in-home estimate

Tell us about your kitchen, bath or built-in project. We usually reply within one business day.

  • In-home measurement and design consult
  • Written, itemized estimate — no hidden fees
  • Built in our Houston shop, installed by our own crew

Office hours: Mon–Fri 8:00 AM – 5:00 PM