Custom Murphy Bed Cabinets in Baytown, TX

How a Baytown project runs

1. Measure room and mattress. We measure ceiling height, wall width, door and window locations, outlets and the clearance needed for the bed to open. We discuss mattress size, thickness and weight.
2. Choose mechanism and layout. We select a lift mechanism matched to the bed size and mattress, then design the cabinet wall with side storage, desk or shelving and lighting.
3. Select finishes. You choose door style, wood or paint, hardware and any lighting from real samples, keeping in mind how the wall will look closed and open.
4. Build in our Houston shop. We build the cabinet, bed frame, side units and fronts from plywood and hardwood, finishing everything before delivery. The mechanism is pre-fitted to confirm alignment.
5. Install, anchor and balance. The crew installs and anchors the cabinet to studs and floor, mounts the mechanism, adjusts tension for the mattress and shows you how to operate and maintain it.

Local conditions we plan for

Murphy beds in Houston often go into spare bedrooms or offices on exterior walls or over garages, where heat and humidity can affect wood and mattresses. We seal cabinet surfaces, leave a small air gap at exterior walls and recommend breathable mattress covers. Slab floors may be uneven, so the cabinet sits on a leveled base and is anchored securely. In older 1950s to 1970s homes with plaster or lath walls, we locate studs carefully and may add blocking to support the mechanism. Closed beds limit airflow, so lowering the bed occasionally helps the mattress stay fresh.

Houston humidity is the main thing we design around. Solid wood moves with the seasons, so we use furniture-grade plywood for cabinet boxes and shelves, and frame-and-panel doors that let panels float. Sink bases get extra finish protection, and in neighborhoods along bayous or in flood-prone zones we can raise toe kicks or use moisture-resistant materials on the lowest components. Keeping the house conditioned during installation helps everything settle in properly.

For general planning, a custom Murphy bed cabinet in Greater Houston often runs around $5,000 to $9,000 for a full or queen bed with a simple face, and $10,000 to $20,000 or more with side cabinets, a desk or a full wall of storage. Mattress not included. These ranges vary with size and materials, so ask for a written estimate.