Custom Kitchen Cabinets in Richmond, TX

Custom Kitchen Cabinets for Richmond homes

Richmond is the Fort Bend County seat, set on the Brazos River southwest of Sugar Land. Its historic downtown holds county government buildings and older homes, while newer subdivisions and master-planned communities spread out around it. It borders Rosenberg to the west, and US 59 and US 90A connect it to Houston.

Richmond has historic homes near downtown, mid-century houses and many newer subdivisions. Older homes can have pier-and-beam floors and plaster walls, calling for careful leveling and trim matching, while newer homes want builder-grade upgrades, scullery pantries and mudroom drop zones. Rural properties nearby often need garage and shop storage.

Families in Richmond tend to ask for drawers over doors in base cabinets, since kids and adults alike can see everything at once. We plan wide pot drawers, a snack drawer at kid height, and a pull-out trash and recycling unit near the sink. Plywood boxes and hardwood drawer construction hold up to the daily slamming a busy family kitchen sees.

Every project starts with an in-home measurement in Richmond. We build in our Houston shop and the same crew handles installation, so the person you talk to at the estimate is accountable for the result. Learn more about our full custom kitchen cabinets service.

What you get with Ace Kustoms

Sized to the inch

Catalog lines come in 3-inch steps, so leftover space gets covered with fillers. We build to your measurements, which means a 31-1/2-inch drawer base where you need it and uppers that meet a 9-foot ceiling without a gap or a fake soffit.

Solid hardwood faces

Doors, drawer fronts and face frames are solid maple, oak, walnut or another hardwood you choose. Painted doors use paint-grade maple, which takes finish smoothly and holds edges better than MDF in a busy kitchen that sees daily wiping.

Drawers built for weight

Drawer boxes use dovetail or doweled hardwood construction on full-extension, soft-close undermount slides rated for heavy loads. Deep pot drawers, a 36-inch-wide drawer bank, and knife or spice inserts are all built into the plan rather than added later.

One crew from shop to install

Nobody hands your job to a subcontractor. The team that measures and builds is the team that levels the boxes on your slab, scribes to the walls and adjusts every hinge, which keeps reveals tight and accountability simple.

Popular options in Richmond

Inset doors

Inset doors sit flush inside the face frame and show a fine, even gap all around. They take more fitting time and pair well with exposed barrel or butt hinges, and they suit older Heights and Montrose-style homes with period character.

Stained hardwoods

Natural maple, white oak, quarter-sawn oak, cherry and walnut can be stained or left with a clear catalyzed finish. We show real finished samples in your kitchen light, because a stain chip in a showroom rarely looks the same at home.

Two-tone kitchens

A common request is painted perimeter cabinets with a stained or contrasting island, or wood uppers over painted lowers. We finish both tones in the shop so colors and sheen are controlled rather than mixed on site.

Interior organization

Options include roll-out trays, tray dividers over the oven, blind-corner pull-outs, trash and recycling pull-outs, appliance garages with outlets, and pantry cabinets with adjustable shelves. Each is sized to your items, not a generic insert.

White shaker kitchen with glass-front upper cabinets

Kitchen with warm walnut upper cabinets, white lowers and stainless appliances

How a Richmond project runs

Consultation and measure. We visit your home, talk through how you cook and store things, and take full measurements including ceiling height, window and outlet locations, plumbing stub-outs and appliance model numbers so the plan fits on the first try.
Layout and samples. You review a drawn layout with elevations and choose wood species, door style, finish and hardware from real samples. We confirm appliance clearances, filler widths and countertop overhangs before anything is cut.
Shop fabrication. Boxes, face frames, doors and drawers are built and finished in our Houston shop. Finishing indoors keeps dust and humidity under control and gives a harder, more even coat than spraying in an occupied home.
Installation. Our crew removes old cabinets if needed, shims bases level on the slab, fastens boxes to studs, scribes fillers and panels to the walls, and sets doors, drawers and hardware. Countertop templating follows once the boxes are locked in.
Final walkthrough. We walk the kitchen with you, adjust every hinge and slide, touch up any marks, and explain care for the finish. Anything that needs attention goes on a written punch list we close out.

Local conditions we plan for

Houston humidity is the main enemy of kitchen cabinetry. Particleboard boxes absorb moisture at the sink base and swell, while solid wood doors move with the seasons, so we use plywood boxes and five-piece doors that allow panels to float. Most local homes sit on slab foundations, and older slabs in 1960s neighborhoods often have a slight crown or dip, which we shim out so countertops sit flat. We leave proper ventilation gaps around dishwashers and refrigerators, and we finish all sides of sink bases. For coastal areas toward Galveston and League City, we recommend stainless or quality plated hinges and slides, since salt air can pit cheaper hardware within a few years.

Fort Bend sits on flat, low ground along the Brazos River and its creeks, and humidity stays high most of the year. We use plywood boxes and stable door construction to handle seasonal swelling. For homes in areas that have seen high water, we can discuss raised toe kicks, moisture-resistant bases in laundry rooms and garages, and finishes that tolerate wipe-downs. Good ventilation in bathrooms protects vanity finishes over time.

As a general planning range, custom kitchen cabinets in Greater Houston often run about $500 to $1,200 per linear foot installed, so a typical 25 to 35 linear-foot kitchen may land between roughly $15,000 and $40,000. Your number depends on size, materials and site conditions, so treat this only as a starting point and get a written estimate after our in-home measure.

Custom Kitchen Cabinets in Richmond: FAQs

Are custom cabinets worth it over semi-custom?

They are when your room has odd dimensions, tall ceilings or specific storage needs, or when you want plywood boxes and solid wood doors throughout. Semi-custom lines can work in a square room with standard heights. We are happy to tell you honestly whether custom makes sense for your kitchen during the estimate.

Can you match my existing cabinets?

Often, yes. We can build new boxes and doors to match an existing profile and finish, for example adding an island or pantry wall. Exact color matching on aged finishes takes sample work, so we make test panels and compare them in your kitchen light before building the full order.

Do you install cabinets on a slab that is not level?

Yes, nearly every Houston slab needs some correction. We find the high point, set a level line, and shim each base cabinet to that line. Toe-kicks are then scribed to the floor so gaps do not show, giving your countertop installer a flat, true surface.

Does Ace Kustoms work in Richmond?

Yes. Richmond is part of our regular service area in Fort Bend County, along with nearby Rosenberg, Sugar Land, Rosenberg–Sugar Land Area, Fulshear. We schedule in-home measurements throughout the week and the estimate is free.

How do I get an estimate in Richmond?

Call (281) 660-3903, text us, or send the form on this page with a few photos and rough measurements. We will set up an in-home visit, measure the space and follow up with a written, itemized estimate.

Planning guides

Kitchen Cabinets · 7 min read