Custom Stair Installations in Friendswood, TX

Custom Stair Installations for Friendswood homes

Friendswood is a city between Houston and League City, mostly in Galveston County with a portion in Harris County. Founded by Quaker settlers, it has a quiet, wooded character, with established neighborhoods along FM 518 and Clear Creek. Pearland lies to the west, and the Clear Lake area and NASA are a short drive east.

Friendswood has many 1970s through 1990s homes on tree-shaded lots and newer subdivisions on its edges. Older homes call for kitchen remodels, soffit removal and new trim, while two-story homes often want stair rail updates. Some neighborhoods near Clear Creek have flooded, so raised bases come up in planning.

In smaller Friendswood homes and townhomes, stairs are often steep, narrow or include winders to save space. We work within those constraints, building custom winder treads and improving riser consistency where possible. Under-stair storage or lighting can also make the most of the space, turning a tight staircase into a feature instead of a problem. Good lighting helps steep stairs feel safer.

Every project starts with an in-home measurement in Friendswood. We build in our Houston shop and the same crew handles installation, so the person you talk to at the estimate is accountable for the result. Learn more about our full custom stair installations service.

What you get with Ace Kustoms

Custom parts when needed

Curved stairs, winders, bullnose starting steps and odd-sized treads are built in our shop. When stock parts do not fit, we make them, rather than forcing a standard piece into a non-standard stair.

Licensed and insured

Stairs carry real safety risk, and we treat them that way. Ace Kustoms is licensed and insured, and our own crew handles stair work from start to finish without subcontracted installers.

Solid hardwood treads

We install solid hardwood treads, typically 1 inch or thicker, in red oak, white oak, hickory, maple or walnut. Solid treads take sanding and refinishing over the decades, unlike veneered caps or laminate overlays that wear through.

Code-aware measurements

We measure every rise and run, correct uneven first and last steps caused by flooring changes, and keep riser heights consistent within code tolerances. Consistent steps are what keep people from tripping, especially in the dark.

Popular options in Friendswood

Painted risers with stained treads

White or colored painted risers paired with stained hardwood treads give a classic, crisp look. Painted risers also hide scuffs better than stained ones, and can be easily touched up as needed.

Open-riser and floating stairs

Modern open-riser stairs with thick treads on steel or concealed stringers. Open risers must not allow a 4-inch sphere to pass through, so we plan riser gaps and tread thickness to meet that requirement.

Curved and winder stairs

Curved stairs and winder treads at turns require custom-cut treads that follow the curve. Winders need at least 6 inches of tread depth at the narrow end and consistent walkline depth, which we lay out carefully.

Bullnose starting steps

A bullnose or curved starting step at the bottom of the stair widens the entry and gives the newel post a strong base. These are built in our shop and fitted to the existing stringer layout.

Floating staircase with LED step lighting and a glass rail

Staircase trim with a stained handrail and iron balusters

How a Friendswood project runs

Measure and inspection. We measure every rise and run, check stringers for soundness, look at the existing railing and note flooring transitions. We flag any code issues, such as uneven risers or missing handrails.
Design and selection. You choose wood species, stain or paint, nosing profile and any custom features such as a bullnose step or lighting. We confirm how the stairs will meet floors at the top and bottom.
Shop preparation. We cut and prepare treads and risers, build custom parts such as winders or bullnose steps, and pre-finish where it makes sense to reduce time on site.
Installation. Our crew removes old coverings, prepares the stringers, scribes and installs each tread and riser with adhesive and fasteners, and installs skirt boards, nosings and trim.
Finish and walkthrough. Site-finished stairs are sanded, stained and coated with a durable floor finish. We walk the stairs with you, check for squeaks and explain cure times before normal use.

Local conditions we plan for

Many Houston two-story homes have stairs built over a slab with a first riser that sits directly on concrete, and flooring changes on that slab often throw off the first step height. We measure and correct this so the first riser matches the rest. Humidity causes wood to move, so we acclimate hardwood treads in the home before installation and leave room for seasonal expansion at the skirt. Builder-grade stairs in the area are often built with stringers and pine or particleboard treads intended for carpet, which need inspection before hardwood goes on. Stairwell walls in two-story homes can be tall, so we plan scaffolding or ladders safely around them.

Salt air, high humidity and storm exposure define this county. We build with plywood boxes, sealed edges and finishes chosen for damp conditions, and we steer coastal homeowners toward corrosion-resistant hardware. In elevated homes, kitchens can see wider temperature and humidity swings, so stable door construction matters. For ground-level homes in flood-prone areas, we can plan raised bases and moisture-tolerant materials for the lowest components.

As a general planning range, a straight carpet-to-hardwood stair conversion in Greater Houston often runs about $150 to $350 per step for treads, risers and finishing, so a typical 14-step stair may land roughly between $2,500 and $5,500 before railing work. Curved stairs and custom parts cost more. Get a written estimate after an in-home measure.

Custom Stair Installations in Friendswood: FAQs

How long does a stair project take?

A straight carpet-to-hardwood conversion usually takes two to four days for installation and another two to three days for site finishing and curing. Custom curved stairs and railing work extend the timeline. We provide a schedule and advise when the stairs can be used.

Do you install railings too?

Yes. Most stair projects include new or updated handrails, balusters and newel posts. Doing both at the same time is efficient and ensures the railing works with the new treads. Call (281) 660-3903 to schedule a free estimate for your stair and railing project.

Can carpeted stairs be converted to hardwood?

Yes, in most homes. We remove the carpet and pad, cut back the old nosings, and install new solid hardwood treads and risers over the existing stringers. We check the framing first and correct any uneven risers so the new stair is consistent from top to bottom.

Does Ace Kustoms work in Friendswood?

Yes. Friendswood is part of our regular service area in Galveston County, along with nearby League City, Pearland, Webster, Alvin. We schedule in-home measurements throughout the week and the estimate is free.

How do I get an estimate in Friendswood?

Call (281) 660-3903, text us, or send the form on this page with a few photos and rough measurements. We will set up an in-home visit, measure the space and follow up with a written, itemized estimate.

Planning guides

Stairs & Railings · 7 min read