Custom Stair Installations in Pasadena, TX

Custom Stair Installations for Pasadena homes

Pasadena is one of the larger cities in Harris County, southeast of Houston along SH 225 and the Ship Channel. Its southern side reaches toward Clear Lake and Armand Bayou. It has a strong working-family character and a wide range of neighborhoods built over many decades.

Pasadena's north side has many postwar homes from the 1940s through 1960s, while south Pasadena has larger subdivisions from the 1970s and 1980s. Older homes commonly need full kitchen replacements, updated vanities and new interior doors and trim. Newer areas see pantry additions, garage cabinets and builder-grade upgrades in kitchens that have held up poorly.

Families in Pasadena use stairs constantly, often with kids running up and down many times a day. Hardwood stairs are easier to clean than carpet and can be refinished when they show wear. We make sure every riser is consistent, nosings are secure and treads have a finish that is durable without being slippery, since safety matters more than looks on stairs.

Every project starts with an in-home measurement in Pasadena. We build in our Houston shop and the same crew handles installation, so the person you talk to at the estimate is accountable for the result. Learn more about our full custom stair installations service.

What you get with Ace Kustoms

Code-aware measurements

We measure every rise and run, correct uneven first and last steps caused by flooring changes, and keep riser heights consistent within code tolerances. Consistent steps are what keep people from tripping, especially in the dark.

Tight, quiet fit

Each tread is cut and scribed to the stringer and skirt, glued with construction adhesive and fastened to prevent squeaks. A properly installed stair feels solid underfoot and stays quiet for years.

Matched to your floors

We match tread species and stain to your hardwood floors or choose a contrasting look, such as stained treads with painted risers. Matching nosings and landing treads tie the stair into the flooring for a seamless transition.

Custom parts when needed

Curved stairs, winders, bullnose starting steps and odd-sized treads are built in our shop. When stock parts do not fit, we make them, rather than forcing a standard piece into a non-standard stair.

Popular options in Pasadena

Carpet-to-hardwood conversion

The most common stair project in Houston. We remove carpet and pad, cut back the old nosings, and install new hardwood treads and risers over the existing stringers, matching the new flooring on the landing and upstairs.

Painted risers with stained treads

White or colored painted risers paired with stained hardwood treads give a classic, crisp look. Painted risers also hide scuffs better than stained ones, and can be easily touched up as needed.

Open-riser and floating stairs

Modern open-riser stairs with thick treads on steel or concealed stringers. Open risers must not allow a 4-inch sphere to pass through, so we plan riser gaps and tread thickness to meet that requirement.

Curved and winder stairs

Curved stairs and winder treads at turns require custom-cut treads that follow the curve. Winders need at least 6 inches of tread depth at the narrow end and consistent walkline depth, which we lay out carefully.

Floating staircase with LED step lighting and a glass rail

Staircase trim with a stained handrail and iron balusters

How a Pasadena project runs

Measure and inspection. We measure every rise and run, check stringers for soundness, look at the existing railing and note flooring transitions. We flag any code issues, such as uneven risers or missing handrails.
Design and selection. You choose wood species, stain or paint, nosing profile and any custom features such as a bullnose step or lighting. We confirm how the stairs will meet floors at the top and bottom.
Shop preparation. We cut and prepare treads and risers, build custom parts such as winders or bullnose steps, and pre-finish where it makes sense to reduce time on site.
Installation. Our crew removes old coverings, prepares the stringers, scribes and installs each tread and riser with adhesive and fasteners, and installs skirt boards, nosings and trim.
Finish and walkthrough. Site-finished stairs are sanded, stained and coated with a durable floor finish. We walk the stairs with you, check for squeaks and explain cure times before normal use.

Local conditions we plan for

Many Houston two-story homes have stairs built over a slab with a first riser that sits directly on concrete, and flooring changes on that slab often throw off the first step height. We measure and correct this so the first riser matches the rest. Humidity causes wood to move, so we acclimate hardwood treads in the home before installation and leave room for seasonal expansion at the skirt. Builder-grade stairs in the area are often built with stringers and pine or particleboard treads intended for carpet, which need inspection before hardwood goes on. Stairwell walls in two-story homes can be tall, so we plan scaffolding or ladders safely around them.

Houston humidity is the main thing we design around. Solid wood moves with the seasons, so we use furniture-grade plywood for cabinet boxes and shelves, and frame-and-panel doors that let panels float. Sink bases get extra finish protection, and in neighborhoods along bayous or in flood-prone zones we can raise toe kicks or use moisture-resistant materials on the lowest components. Keeping the house conditioned during installation helps everything settle in properly.

As a general planning range, a straight carpet-to-hardwood stair conversion in Greater Houston often runs about $150 to $350 per step for treads, risers and finishing, so a typical 14-step stair may land roughly between $2,500 and $5,500 before railing work. Curved stairs and custom parts cost more. Get a written estimate after an in-home measure.

Custom Stair Installations in Pasadena: FAQs

What are the code requirements for stair risers and treads?

Under the residential code commonly used in the Houston area, risers are generally limited to 7-3/4 inches, treads must be at least 10 inches deep, and riser heights in a flight should not vary by more than 3/8 inch. Local requirements can differ, so we confirm what applies to your home.

Why does my bottom step feel different?

It is usually because flooring was added or removed at the bottom or top, changing that step's height. A riser that is half an inch taller or shorter than the others is a common tripping hazard. We measure and adjust so all risers match within code tolerance.

Should stair treads match my floors?

It looks best when the treads match or deliberately contrast with the floor. Many homeowners match species and stain, while others choose stained treads with painted risers. We bring samples and can stain test pieces on site to compare with your floors.

Does Ace Kustoms work in Pasadena?

Yes. Pasadena is part of our regular service area in Harris County, along with nearby Deer Park, Houston, La Porte, Webster. We schedule in-home measurements throughout the week and the estimate is free.

How do I get an estimate in Pasadena?

Call (281) 660-3903, text us, or send the form on this page with a few photos and rough measurements. We will set up an in-home visit, measure the space and follow up with a written, itemized estimate.

Planning guides

Stairs & Railings · 7 min read