Custom TV Accent Wall Cabinets in Friendswood, TX

Custom TV Accent Wall Cabinets for Friendswood homes

Friendswood is a city between Houston and League City, mostly in Galveston County with a portion in Harris County. Founded by Quaker settlers, it has a quiet, wooded character, with established neighborhoods along FM 518 and Clear Creek. Pearland lies to the west, and the Clear Lake area and NASA are a short drive east.

Friendswood has many 1970s through 1990s homes on tree-shaded lots and newer subdivisions on its edges. Older homes call for kitchen remodels, soffit removal and new trim, while two-story homes often want stair rail updates. Some neighborhoods near Clear Creek have flooded, so raised bases come up in planning.

Older homes in Friendswood often have living rooms designed around a fireplace or window, not a large TV. An accent wall can give the TV a proper place without disrupting the room's character. We plan around older trim, plaster walls and limited outlets, coordinating with your electrician to add in-wall power and hide cables cleanly. The result respects the room's original layout.

Every project starts with an in-home measurement in Friendswood. We build in our Houston shop and the same crew handles installation, so the person you talk to at the estimate is accountable for the result. Learn more about our full custom tv accent wall cabinets service.

What you get with Ace Kustoms

Lighting for mood and contrast

LED strips behind slats, under a floating console or along shelves add soft backlighting that reduces eye strain during evening viewing and highlights the wood texture. Lights sit on their own dimmer or switch.

A real focal point

Wood slats, paneling or a contrasting finish behind the TV give the room a strong center. When the screen is off, the wall still looks finished rather than leaving a black rectangle on blank drywall.

Cables completely hidden

In-wall power and cable kits, conduit to the console and grommets in the cabinet keep cords out of sight. No cord covers or dangling wires between the TV and the media equipment.

Secure TV mounting

We add solid blocking behind slats or panels for the TV mount, so it is anchored to framing rather than relying on drywall or thin panels. Large, heavy TVs stay secure and level.

Popular options in Friendswood

Recessed TV niche

A framed niche with the TV set flush or slightly recessed into the wall, surrounded by paneling or slats. Requires careful planning for ventilation, mount clearance and future TV sizes.

Side shelves and display

Open floating shelves or lit niches on either side of the TV for books, plants and decor. Balances the wall and adds display without the bulk of a full bookcase.

Vertical slat wall

Solid hardwood slats in white oak, walnut or painted poplar mounted over a dark backer or acoustic felt. Slats can run floor to ceiling or frame the TV area, with optional backlighting behind them.

Paneled or shiplap wall

Flat panels, board-and-batten, shiplap or raised panels painted or stained to contrast with the room. A traditional option that works well in older homes and transitional interiors. Paint colors can be changed later.

Modern bathroom with a soaking tub, wood slat wall and floating vanity

Living room with tall windows, a wood ceiling and built-in shelving

How a Friendswood project runs

Measure wall and equipment. We measure the wall, ceiling height and room layout, and note the TV size, mount, soundbar and media equipment you plan to use, along with outlets and existing wiring.
Design the feature wall. You review a drawing showing slats or panels, console size, TV height, shelving, lighting and wiring paths. We consider viewing angles from your main seating area.
Select materials. You choose wood species, stain or paint, backer color, hardware and lighting from real samples. We discuss how each looks in your room's natural and artificial light.
Build in our shop. We build slats, panels, consoles and shelves from hardwood and plywood in our Houston shop, finishing everything before installation to minimize dust in your home.
Install, wire and mount. The crew installs blocking, panels and cabinets, coordinates in-wall wiring with your electrician or AV installer, mounts the TV and tests lighting and equipment ventilation.

Local conditions we plan for

Many Houston living rooms have large windows that create glare on TVs, so we consider window placement and sun angles when choosing TV height and wall location. Exterior walls see temperature and humidity swings, so we seal all wood surfaces and leave a small air gap where needed. In older 1950s to 1970s homes with plaster walls or limited outlets, running in-wall power and low-voltage cables may take more planning. On slab foundations, floor outlets are difficult to add, so we route power through walls. Equipment ventilation matters in warm rooms during long Houston summers.

Salt air, high humidity and storm exposure define this county. We build with plywood boxes, sealed edges and finishes chosen for damp conditions, and we steer coastal homeowners toward corrosion-resistant hardware. In elevated homes, kitchens can see wider temperature and humidity swings, so stable door construction matters. For ground-level homes in flood-prone areas, we can plan raised bases and moisture-tolerant materials for the lowest components.

For general planning, a TV accent wall with slats or paneling and a floating console in Greater Houston often runs around $4,000 to $10,000, while larger walls with full-width cabinets, side shelves and lighting can range from $12,000 to $25,000 or more. TV and electronics are not included. These are planning ranges, so ask for a written estimate.

Custom TV Accent Wall Cabinets in Friendswood: FAQs

Can the accent wall include lighting?

Yes. LED strips behind slats, under a floating console or along shelves add backlighting. We coordinate with your electrician for drivers, dimmers and switches so the lighting can be adjusted for movies or general use. Warm white around 2700K to 3000K is typical.

How high should my TV be on an accent wall?

For most living rooms, the center of the TV should be close to eye level when seated, often around 40 to 48 inches from the floor depending on seating height and screen size. We consider your seating, room layout and personal preference before finalizing the height.

Can you hide all the wires?

Yes, with planning. We use in-wall power and cable kits, recessed boxes and conduit to the console. Your electrician handles any new outlets or in-wall power. The goal is no visible cables between the TV and the console. Spare conduit makes later upgrades much easier.

Does Ace Kustoms work in Friendswood?

Yes. Friendswood is part of our regular service area in Galveston County, along with nearby League City, Pearland, Webster, Alvin. We schedule in-home measurements throughout the week and the estimate is free.

How do I get an estimate in Friendswood?

Call (281) 660-3903, text us, or send the form on this page with a few photos and rough measurements. We will set up an in-home visit, measure the space and follow up with a written, itemized estimate.

Planning guides

Storage & Built-Ins · 7 min read