Custom TV Accent Wall Cabinets in Seabrook, TX

How a Seabrook project runs

1. Measure wall and equipment. We measure the wall, ceiling height and room layout, and note the TV size, mount, soundbar and media equipment you plan to use, along with outlets and existing wiring.
2. Design the feature wall. You review a drawing showing slats or panels, console size, TV height, shelving, lighting and wiring paths. We consider viewing angles from your main seating area.
3. Select materials. You choose wood species, stain or paint, backer color, hardware and lighting from real samples. We discuss how each looks in your room's natural and artificial light.
4. Build in our shop. We build slats, panels, consoles and shelves from hardwood and plywood in our Houston shop, finishing everything before installation to minimize dust in your home.
5. Install, wire and mount. The crew installs blocking, panels and cabinets, coordinates in-wall wiring with your electrician or AV installer, mounts the TV and tests lighting and equipment ventilation.

Local conditions we plan for

Many Houston living rooms have large windows that create glare on TVs, so we consider window placement and sun angles when choosing TV height and wall location. Exterior walls see temperature and humidity swings, so we seal all wood surfaces and leave a small air gap where needed. In older 1950s to 1970s homes with plaster walls or limited outlets, running in-wall power and low-voltage cables may take more planning. On slab foundations, floor outlets are difficult to add, so we route power through walls. Equipment ventilation matters in warm rooms during long Houston summers.

Houston humidity is the main thing we design around. Solid wood moves with the seasons, so we use furniture-grade plywood for cabinet boxes and shelves, and frame-and-panel doors that let panels float. Sink bases get extra finish protection, and in neighborhoods along bayous or in flood-prone zones we can raise toe kicks or use moisture-resistant materials on the lowest components. Keeping the house conditioned during installation helps everything settle in properly.

For general planning, a TV accent wall with slats or paneling and a floating console in Greater Houston often runs around $4,000 to $10,000, while larger walls with full-width cabinets, side shelves and lighting can range from $12,000 to $25,000 or more. TV and electronics are not included. These are planning ranges, so ask for a written estimate.