Brazoria County · Trim, Doors & Stairs

Custom Stair Installations in Angleton, TX

Across Brazoria County, carpet-to-hardwood stair conversions are one of our most requested projects. In Angleton, our own crew handles every tread and riser.

Free Estimate in Angleton Call (281) 660-3903

Custom Stair Installations for Angleton homes

Angleton is the Brazoria County seat, located on SH 288 roughly halfway between Pearland and Lake Jackson. It has the county courthouse, an older downtown and residential neighborhoods that spread out into farm and ranch land. The Brazosport cities and the coast are a short drive south, and Houston is about 45 minutes north on 288.

Angleton has many homes from the 1950s through the 1980s, often single-story ranch houses with compact kitchens, plus newer subdivisions and rural properties. Kitchen remodels that rework closed layouts, vanity updates and garage storage are common. Acreage homes also ask for mudrooms and shop cabinets.

When buyers walk into a Angleton home, the staircase is often front and center. Worn carpet on stairs can make an otherwise updated home feel dated in listing photos. Converting to hardwood with fresh railings is a practical improvement before selling, and we help you choose stain colors that appeal broadly and work with the existing floors. Painted risers keep the look fresh.

Every project starts with an in-home measurement in Angleton. We build in our Houston shop and the same crew handles installation, so the person you talk to at the estimate is accountable for the result. Learn more about our full custom stair installations service.

What you get with Ace Kustoms

Tight, quiet fit

Each tread is cut and scribed to the stringer and skirt, glued with construction adhesive and fastened to prevent squeaks. A properly installed stair feels solid underfoot and stays quiet for years.

Matched to your floors

We match tread species and stain to your hardwood floors or choose a contrasting look, such as stained treads with painted risers. Matching nosings and landing treads tie the stair into the flooring for a seamless transition.

Custom parts when needed

Curved stairs, winders, bullnose starting steps and odd-sized treads are built in our shop. When stock parts do not fit, we make them, rather than forcing a standard piece into a non-standard stair.

Licensed and insured

Stairs carry real safety risk, and we treat them that way. Ace Kustoms is licensed and insured, and our own crew handles stair work from start to finish without subcontracted installers.

Popular options in Angleton

Painted risers with stained treads

White or colored painted risers paired with stained hardwood treads give a classic, crisp look. Painted risers also hide scuffs better than stained ones, and can be easily touched up as needed.

Open-riser and floating stairs

Modern open-riser stairs with thick treads on steel or concealed stringers. Open risers must not allow a 4-inch sphere to pass through, so we plan riser gaps and tread thickness to meet that requirement.

Curved and winder stairs

Curved stairs and winder treads at turns require custom-cut treads that follow the curve. Winders need at least 6 inches of tread depth at the narrow end and consistent walkline depth, which we lay out carefully.

Bullnose starting steps

A bullnose or curved starting step at the bottom of the stair widens the entry and gives the newel post a strong base. These are built in our shop and fitted to the existing stringer layout.

Staircase trim with a stained handrail and iron balusters

Curved staircase with a wood handrail and iron balusters

How a Angleton project runs

Measure and inspection. We measure every rise and run, check stringers for soundness, look at the existing railing and note flooring transitions. We flag any code issues, such as uneven risers or missing handrails.
Design and selection. You choose wood species, stain or paint, nosing profile and any custom features such as a bullnose step or lighting. We confirm how the stairs will meet floors at the top and bottom.
Shop preparation. We cut and prepare treads and risers, build custom parts such as winders or bullnose steps, and pre-finish where it makes sense to reduce time on site.
Installation. Our crew removes old coverings, prepares the stringers, scribes and installs each tread and riser with adhesive and fasteners, and installs skirt boards, nosings and trim.
Finish and walkthrough. Site-finished stairs are sanded, stained and coated with a durable floor finish. We walk the stairs with you, check for squeaks and explain cure times before normal use.

Local conditions we plan for

Many Houston two-story homes have stairs built over a slab with a first riser that sits directly on concrete, and flooring changes on that slab often throw off the first step height. We measure and correct this so the first riser matches the rest. Humidity causes wood to move, so we acclimate hardwood treads in the home before installation and leave room for seasonal expansion at the skirt. Builder-grade stairs in the area are often built with stringers and pine or particleboard treads intended for carpet, which need inspection before hardwood goes on. Stairwell walls in two-story homes can be tall, so we plan scaffolding or ladders safely around them.

Much of Brazoria County is low, flat and close to the Gulf, so humidity and salt air are constant factors. We use plywood boxes, sealed edges and durable finishes, and we pay attention to hardware selection in homes near the coast where corrosion is a concern. For homes in flood-prone areas, raised toe kicks and moisture-resistant materials in the lowest components can make recovery easier after high water.

As a general planning range, a straight carpet-to-hardwood stair conversion in Greater Houston often runs about $150 to $350 per step for treads, risers and finishing, so a typical 14-step stair may land roughly between $2,500 and $5,500 before railing work. Curved stairs and custom parts cost more. Get a written estimate after an in-home measure.

Custom Stair Installations in Angleton: FAQs

Why does my bottom step feel different?

It is usually because flooring was added or removed at the bottom or top, changing that step's height. A riser that is half an inch taller or shorter than the others is a common tripping hazard. We measure and adjust so all risers match within code tolerance.

Should stair treads match my floors?

It looks best when the treads match or deliberately contrast with the floor. Many homeowners match species and stain, while others choose stained treads with painted risers. We bring samples and can stain test pieces on site to compare with your floors.

How long does a stair project take?

A straight carpet-to-hardwood conversion usually takes two to four days for installation and another two to three days for site finishing and curing. Custom curved stairs and railing work extend the timeline. We provide a schedule and advise when the stairs can be used.

Does Ace Kustoms work in Angleton?

Yes. Angleton is part of our regular service area in Brazoria County, along with nearby Richwood, Danbury, Lake Jackson, Clute. We schedule in-home measurements throughout the week and the estimate is free.

How do I get an estimate in Angleton?

Call (281) 660-3903, text us, or send the form on this page with a few photos and rough measurements. We will set up an in-home visit, measure the space and follow up with a written, itemized estimate.

More services in Angleton

Explore

Planning guides

Stairs & Railings · 8 min read