Brazoria County · Cabinetry & Built-Ins

Custom Home Bar Cabinetry in Angleton, TX

Custom home bar cabinetry in Angleton gives drinks and glassware their own space away from the kitchen. Ace Kustoms builds wet and dry bars throughout Brazoria County.

Free Estimate in Angleton Call (281) 660-3903

Custom Home Bar Cabinetry for Angleton homes

Angleton is the Brazoria County seat, located on SH 288 roughly halfway between Pearland and Lake Jackson. It has the county courthouse, an older downtown and residential neighborhoods that spread out into farm and ranch land. The Brazosport cities and the coast are a short drive south, and Houston is about 45 minutes north on 288.

Angleton has many homes from the 1950s through the 1980s, often single-story ranch houses with compact kitchens, plus newer subdivisions and rural properties. Kitchen remodels that rework closed layouts, vanity updates and garage storage are common. Acreage homes also ask for mudrooms and shop cabinets.

Many newer homes in Angleton include a game room, media room or open family room that is ready for a bar. Homeowners ask us to add a wet or dry bar there, often with a beverage fridge, ice maker and glass uppers. When the builder left plumbing stubs for a future bar, adding a sink is much simpler and less expensive than starting from scratch.

Every project starts with an in-home measurement in Angleton. We build in our Houston shop and the same crew handles installation, so the person you talk to at the estimate is accountable for the result. Learn more about our full custom home bar cabinetry service.

What you get with Ace Kustoms

Entertaining without crowding the kitchen

Guests can grab a drink, ice and glasses without walking through the cook's workspace. On busy holidays and game days, that separation keeps traffic out of the kitchen and the host free to cook.

Appliances that fit cleanly

Beverage fridges, wine coolers, ice makers and dishwasher drawers are built in with flush or slightly recessed fronts, matched panels where possible and the airflow clearance each unit requires to run efficiently.

Proper glassware and bottle storage

Stemware racks, glass-front uppers, bottle cubbies and drawers with dividers keep fragile glassware safe and bottles organized. Liquor can be stored in lockable cabinets in homes with kids or teenagers.

Durable, spill-resistant finishes

Catalyzed finishes and sealed edges handle spills, condensation from cold glasses and ice. Countertops in quartz, stone or sealed hardwood stand up to wet glasses and citrus far better than raw wood.

Popular options in Angleton

Wet bar

A full bar with a sink, often a 15 to 18-inch bar sink with a high-arc faucet, plus an ice maker and beverage fridge. Works best near existing plumbing to keep drain work simple.

Wine wall

Floor-to-ceiling wine racks in solid hardwood with diamond bins, individual bottle cradles or display racks, often paired with a dual-zone wine cooler. Racks are sized for standard 750 ml bottles.

Back bar with glass shelves

Glass shelves or mirrored backs lit from behind or below, showing bottles like a bar in a restaurant. A darker cabinet finish around the shelves makes the lit bottles stand out.

Bar with seating

A peninsula or counter with a 12 to 15-inch overhang for stools. Counter height is usually 36 inches, while true bar height runs 42 inches. Footrests can be added at the base.

Kitchen with red backlit open shelving and LED strip lighting

Modern kitchen with a gray island, bar stools and backlit slatted wall cabinets

How a Angleton project runs

Plan the bar's role. We talk about how you host, what you serve and how many people gather, then measure the space and locate plumbing, electrical and HVAC that affect where appliances can go.
Spec the appliances. We work from the exact appliance models you choose, including cutout sizes, ventilation and drain needs. That keeps openings precise and avoids installation surprises later.
Design and select finishes. You review a drawing with cabinet layout, wine and glass storage, lighting and countertop. Then you choose wood, paint, glass, hardware and countertop from real samples.
Build in our shop. We build the cabinets, wine racks and panels in our Houston shop, finishing all surfaces with spill-resistant coatings before delivery to your home. Wine racks are test-fit with real bottles.
Install and coordinate. The crew installs the cabinets, then coordinates countertop templating, plumbing and electrical. We fit appliances and panels, adjust doors and test lighting before the final walkthrough.

Local conditions we plan for

On Houston's slab foundations, adding a wet bar sink away from existing plumbing can mean cutting concrete for a new drain, which adds cost. Placing a bar near a kitchen, laundry or bathroom wall keeps it simpler. Ice makers and beverage fridges work harder in warm rooms, so we keep them away from west-facing walls and ensure front ventilation stays clear. Wine should be kept in a wine cooler rather than open racks if the room warms when the AC is set back. Humidity and condensation from cold glasses make sealed finishes and stone or quartz countertops a practical choice.

Much of Brazoria County is low, flat and close to the Gulf, so humidity and salt air are constant factors. We use plywood boxes, sealed edges and durable finishes, and we pay attention to hardware selection in homes near the coast where corrosion is a concern. For homes in flood-prone areas, raised toe kicks and moisture-resistant materials in the lowest components can make recovery easier after high water.

As a general planning range, a dry bar in Greater Houston often runs around $5,000 to $12,000 including countertop, and a wet bar with a sink, ice maker and wine storage commonly ranges from $15,000 to $35,000 or more, not counting appliances. Plumbing on a slab can add more. These figures are for planning only, so get a written estimate after we visit.

Custom Home Bar Cabinetry in Angleton: FAQs

What is the difference between a wet bar and a dry bar?

A wet bar has a sink with running water and a drain, which makes rinsing glasses and mixing drinks easier. A dry bar has no plumbing, just cabinets, a countertop and often a beverage fridge. Dry bars are simpler and less expensive, especially when plumbing would require cutting into a slab.

Do ice makers need a drain?

Many undercounter ice makers, especially clear ice models, need a gravity drain or a drain pump to remove melt water. Some models do not. We check the manufacturer's specifications for your chosen unit and coordinate with your plumber so the drain is planned before the cabinets are built.

Can I store wine in open racks?

Short-term, yes. For bottles you plan to age, a temperature-controlled wine cooler is better, because Houston homes can get warm when the AC is set back or during outages. Many bars combine open racks for everyday bottles with a cooler for wine you want to keep longer.

Does Ace Kustoms work in Angleton?

Yes. Angleton is part of our regular service area in Brazoria County, along with nearby Richwood, Danbury, Lake Jackson, Clute. We schedule in-home measurements throughout the week and the estimate is free.

How do I get an estimate in Angleton?

Call (281) 660-3903, text us, or send the form on this page with a few photos and rough measurements. We will set up an in-home visit, measure the space and follow up with a written, itemized estimate.

More services in Angleton

Explore

Planning guides

Storage & Built-Ins · 7 min read